The 911 is the sports car we see most often in Ticino garages, and it is also the one people drive the most: to work, over the passes in summer, up the motorway to the north. Every generation and every version has its delicate points. On this page we explain how we work on a 911; for other Porsches (Cayenne, Taycan, Macan, Panamera and classics) see our Porsche detailing page.
992 and 991: what changes for detailing
The most recent 911 generations, the 991 and 992, have wide bodies, many black or gloss plastic surfaces, sensors in the bumpers and a rear air intake integrated into the engine lid. The basic method is the same: hand wash, decontamination, light correction and protection. What changes is the detail to protect: gloss black trim that scratches instantly, LED headlights with lenses that must not be polished with aggressive compounds, and seals around roofs and windows.
On the 911 Cabriolet, the fabric hood is cleaned with a dedicated textile cleaner, a soft brush and a generous rinse, and can then be reproofed. On the Targa we never operate the roof without you and never work with water around the open mechanism.
The front end and paint protection film
The front of a 911 is low and wide and takes stone chips, insects and tar. Many 911s, and almost all GT3s and Turbos, have PPF on the bumper, bonnet, wings or mirrors. On the film we use compatible shampoos, no strong solvents and no high-pressure jets near the edges, which could lift. If the film is yellowed, scratched or peeling, we let you know; replacement is a job for a specialist installer. If the front is not protected, we can discuss a ceramic coating together, and weigh up ceramic coating against PPF.
Rear wing, rear grilles and engine
Fixed or active wing
The fixed wing on GT3s and the active wing on the Carrera and Turbo have edges, mounts and gaps where dust and wax residue collect. We clean them by hand with brushes and microfibres. We never force an active wing or lift it by hand: if it needs raising, you do it from the switch.
Engine lid grilles
The 911 has its engine at the back: the louvred rear grille collects dust, leaves and product residue. We clean it dry or barely damp, with soft brushes and blown air. We do not spray water or products into the grilles and do not wash the engine bay with water: at most a gentle clean of the visible parts.
The calculator gives you a price in 30 seconds based on model, service and area.
Wheels, brakes and centre-lock nuts
On GT3s and Turbo S models the wheels often have centre-lock nuts and the brakes may be carbon-ceramic, with painted calipers. Carbon-ceramic discs must not be cleaned with acidic products or stiff brushes: we use a gentle cleaner and a soft brush. Calipers and wheels are decontaminated with an iron fallout remover and can be protected with a wheel ceramic coating.
Interior: leather, Race-Tex and carbon fibre
Race-Tex steering wheels, seats and headliners (a material similar to Alcantara) are cleaned with a dedicated, barely damp product and brushed, without soaking them. Bucket seats, often in leather and carbon fibre, get marked on the bolsters every time you climb in: we clean the leather and condition it with a matte, silicone-free product. Gloss carbon is cleaned only with new microfibres. For light leathers see leather seat cleaning.
What we don't do
We do not polish over PPF with abrasive compounds, we do not wet the engine bay, we do not lift active wings by hand, we do not use stiff brushes on carbon-ceramic discs and we do not polish matte carbon. Repairs and bodywork remain the job of the service centre.
Indicative prices
For every 911 (sports category), premium detailing starts from CHF 590 and ceramic protection from CHF 1290; polishing depends on the condition of the paint. A full valet starts from CHF 260, and interior cleaning only from CHF 180. Prices include VAT.
The brands mentioned belong to their respective owners; we are not affiliated with or authorised by the manufacturer.